Star Destroyer Paper Model Project

[paplexworld]

"Start the decorative works under the Star Destroyer's hull. The reactor dome is now placed, alongside with the details on the layers of the panel. It takes a lot of time on scoring those lines, but I think I could finish all the details under the hull within a few days.

#PaperStarDestroyer #StarWars
https://www.facebook.com/PaperStarDestroyer

[paplexworld]

Very impressive work. Will you be making Deathstar too? In the scale of this Star Destroyer... now THAT would be even more impressive.

Ohhhhhh~!
I think I need a hectares of land for that project.. and could you sponsor me some million pages of paper?!

[paplexworld]

"Full view of the details under her hull.
Maybe that's enough for scoring works on the surface, but I will add some more embossing parts later.

The next step will be the details around the hangar bay!

#PaperStarDestroyer #StarWars
https://www.facebook.com/PaperStarDestroyer

"

[paplexworld]

Again with a full view of all details under the ship.
(The top and bottom parts can be separated. Makes working on this area much easier.)
You will see that the details around the ship's hulls are now also mostly finished.

#PaperStarDestroyer #StarWars
https://www.facebook.com/PaperStarDestroyer

[toudi_sk]

fantastic work

I built from Metal Earth tin model 10.4cm / 4 3⁄32in long and the smaller rear nozzles were a challenge,
I looked as a excavator at the hard ground



and before as a gift box too

[paplexworld]

fantastic work

I built from Metal Earth tin model 10.4cm / 4 3⁄32in long and the smaller rear nozzles were a challenge,
I looked as a excavator at the hard ground

Good one!
I understand how you feel when you assembling those tiny pieces!

[paplexworld]

More details around the hangar bay are coming. I might add a tiny TIE fighters into it too, but after the main craft has been completed.

#PaperStarDestroyer #StarWars

https://www.facebook.com/PaperStarDestroyer

[paplexworld]

"Since then, I’ve been finished the details under the ship and now working on the top panel with the same method. The technic I use is to draw the lines with pencil then do scoring to “engrave” those carbon lines into the paper surface. This technic will make the lines visible clearly for decades.

#PaperStarDestroyer #StarWars
https://www.facebook.com/PaperStarDestroyer

[paplexworld]

Now with one full view shot… so many things left to do!
scoring works is going on, covering the panels one by one.
After finish this part I would go for the details around the tiers.

#PaperStarDestroyer #StarWars
https://www.facebook.com/PaperStarDestroyer

[paplexworld]

The main structure is completely done, from now I'll just keep adding more details. Start with these pieces around the decks.

#PaperStarDestroyer #StarWars
For more updated progress of the ship, please checkout my Facebook fanpage below!
https://www.facebook.com/PaperStarDestroyer